Technoware Analysis on Mold and Dies

Abstract

Mold & Dies are equipment or tools to support the production of a product. Usually Mold & Dies are
installed on production machines, such as plastic machines, press machines, die casting machines, rubber
machines and others. Products are formed, cut, bent or drawn on Molds & Dies. Therefore, the use of Mold &
Dies in the manufacturing industry plays a very important role. Most of the manufactured products use Mold &
Dies, such as metal plastics, electronics / telematics, ceramics, rubber, and others. Mold & Dies are two types of
production equipment / tools that have different functions, as well as their working mechanisms and
construction. The method of implementing activities on the Aspect of Technology Assessment for the
implementation of the Mold & Dies Roadmap Preparation activities, namely by using the Technometric
Analysis Method, in which the Technometric Analysis method is divided into 4 (four) components. All four
technology components are required simultaneously. The transformation carried out cannot be without one of
these four components. From the results of the study and analysis of technoware components, the total
contribution of the types of machines for technoware components was only 0.137, the total contribution of
machine age for technoware components obtained was 0.086, the design technology component contributions
were 0.103, maintenance of technoware components was 0.103, quality contribution Control is 0.137, and
supporting facility equipment is 0.103.